- Home
- Equipment
Refine by
Binmaster Environmental Equipment & Supplies
214 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Side mount extension for thick bin walls. Side mount the BMRX rotary through thick concrete walls using a 6”, 8”, or 12” extended drive shaft. This extension includes a protective shaft guard with a sealed bearing end to support the shaft and prevent material from packing in the extension and causing false alarms. Consult with a BinMaster expert to configure the ideal rotary for ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Diaphragm switch for hazardous locations with standard .016” thick, black neoprene diaphragm, internally ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
GRP-3 - Single-blade, stainless steel paddle for average to heavy weight materials, paddle is 2-1/2” long and turns in a 5” diameter, insertable paddle blade is 1/8” thick and 1” ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The MCP-300 is an extended mini capacitance probe used for point-level detection in water-based liquids, with a stainless-steel tube that is user-customizable in lengths from 2.5” to 9.8”. Often used in pump rooms to protect pumps against damage caused by water leaks. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Triax cable, Polyethylene 75 Ohm, used with PRO Remote up to 250°F (120°C). Sold by the foot. Enter number of feet in quantity field when ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-31 - Sanitary vibrating probe level sensor, 20 to 250V AC/DC, 11.81” insertion length, with a 2” stainless steel sanitary fitting for use with tri-clover style clamp. Process temp to 176°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
P94 - 13.5” Unshielded, bare bendable probe, includes 3/4” NPT ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
GRP-22 - Triple-bladed, stainless steel paddle for average to heavy weight materials, turns in a 5” diameter, paddle blades are 1/8” thick and 1” ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
MAXIMA+ die cast aluminum cap (tall) units prior to April ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Triax cable, Teflon 75 Ohm, used with PRO Remote up to 500°F (260°C). Sold by the foot. Enter number of feet in quantity field when ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster’s VRX41 vibrating probe level sensor with pipe extension has been revamped with a bright, built-in LED status indicator to make monitoring levels and plugged chutes easier than ever. The light can easily be seen from afar, appearing as red or green, and changing color based on if material is or is not covering the probe and damping its ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Diaphragm switch for hazardous locations with standard .016” thick, black neoprene diaphragm, externally ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VF-92 - Vibrating fork level sensor with 316L stainless steel 5.91” tuning fork with hanging cable extension. Available in lengths up to 240 ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
MR-G-220 - Mini-Rotary 220 VAC with 4-vane, polycarbonate paddle, complete with SPDT contacts. This economical and compact mini rotary paddle level indicator is designed for controlling material levels in smaller bins and hoppers where other types of equipment simply won't ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
https://binmaster.com/mini-rotary-single-vane-ss-rectangular-paddle-for-8-mm-shaft.html. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Mini-Rotary 4-vane, polycarbonate paddle turns in a 3.2” diameter, paddle blades are 1.25” wide for 8 mm ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1” Aluminum NPT female coupler to attach guard pipes ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Extended and shielded Delrin-sleeved 3-A/USDA probe, available in a variety of ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Want more information about what rotary options to order? Get more information in the Rotary Configuration Guide and Rotary Paddle Selection Guide. The BinMaster BMRX-200 rotary level indicator is used in solids and powders to prevent overfills, dry runs, or process shutdowns. It has an onboard PCB and DPDT relays that allow users to set up two switching outputs, such as one to a covered and the ...